flywheel puller

flywheel puller
A specially designed tool with three arms and a center stud usedto removing the flywheel. The three arms are attached to three mounting points (either on the rim of the flywheel or into three threaded holes in the flywheel). The center stud is screwed into the center of the flywheel and pushes against the end of the crankshaft. As the stud pushes in, the flywheel is forced away from the crankshaft.

Dictionary of automotive terms. 2015.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • puller — A device for separating two components which are secured by press fitting them. See stud puller ball bearing puller bearing puller dent puller flange type puller flywheel puller gear puller hub puller …   Dictionary of automotive terms

  • Stroke ratio — In a reciprocating piston engine, the stroke ratio, defined by either bore/stroke ratio or stroke/bore ratio, is a term which is used to describe the ratio between the diameter of the cylinder bore and the length of the piston stroke within its… …   Wikipedia

  • instrumentality — I (New American Roget s College Thesaurus) Means to an end Nouns 1. instrumentality; instrument, aid; subservience, subserviency; vehicle, hand, expedient (see plan); means, agency. 2. (means) stepping stone; [master or skeleton] key, latchkey,… …   English dictionary for students

  • gear — Wheel like part with teeth cut into the rim. When one gear meshes with another gear, it causes the second gear to drive the other and in this way transmits power. When the gears are different sizes (different number of teeth on each gear) the… …   Dictionary of automotive terms

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”